REPRESENTATIVE CONCEPTLaboratory Vacuum Planetary Mixer
Li-ion Laboratory EquipmentLaboratory slurry mixing under controlled pressure.

Intended for small-substrate coating trials where rotational spreading can be used to investigate compatible liquid films for battery-material research.
| Parameter | Indicative Configuration |
|---|---|
| Equipment type | Laboratory Spin Coater |
| Substrate range | Up to Ø100 / 150 / 200 mm |
| Speed range | Preliminary 300–10,000 RPM family envelope |
| Speed adjustment | Programmable electronic control |
| Speed setting resolution | Target 1 RPM |
| Speed feedback | Encoder-based monitoring |
| Acceleration | Programmable ramp |
| Deceleration | Programmable ramp |
| Rotation direction | Clockwise; reverse optional |
| Spin timer | 1–999 seconds, proposed |
| Recipe storage | Multiple programmable spin profiles |
| Substrate holding | Vacuum chuck |
| Chuck options | Interchangeable substrate fixtures |
| Vacuum source | External or integrated pump |
| Process enclosure | Covered centrifugal containment bowl |
| Bowl construction | Stainless steel or chemically compatible polymer |
| Drain system | Solvent-compatible collection/drain outlet |
| Motor | High-speed electronically controlled spindle |
| Speed capability | Substrate-size and chuck-dependent |
| Controller | Digital speed controller / touchscreen optional |
| Electrical supply | 230 V AC, single-phase proposed |
| Safety | Cover interlock, overspeed protection, imbalance assessment |
| Applications | Thin-film coating and battery-material research |
Specifications indicate preliminary equipment configurations. Final technical parameters, performance, material compatibility and supply arrangements will be confirmed following application review and detailed engineering.
The 300–10,000 RPM range is a preliminary family envelope, not a safe operating rating for every substrate. A 200 mm substrate is not confirmed for maximum family speed. Allowable RPM requires validation of chuck, substrate mass, geometry, balance and retention.
A configurable laboratory spin coater uses a vacuum chuck and programmed rotation, acceleration and deceleration to distribute a formulation over a selected substrate. Interchangeable fixtures and application-specific spin profiles support thin-film coating and battery-material research. Film thickness and uniformity require process trials.
Thin-film research, substrate-wetting studies and small-sample coatings suitable for rotational deposition. Confirm the intended process, materials and acceptance method during application review.
Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.
Programmable electronic spindle control with encoder-based monitoring; touchscreen control is optional.
Final configuration and supply arrangements follow application review and detailed engineering. Utilities, facility interfaces and integration are agreed for the selected equipment. This enquiry-led listing does not establish current manufacture, completed installations, stock, immediate dispatch or a confirmed partner relationship.
Chuck retention, substrate mass and geometry, balance, cover containment and overspeed protection require configuration-specific validation. Chemical compatibility, solvent collection, extraction and ignition hazards require application review. A solvent-compatible drain proposal does not establish enclosure or electrical solvent safety.
A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.
Read the Product Information Disclaimer
Request technical documentation and an application-specific configuration with your enquiry.
This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation. Please request the current engineering and supply status.
Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.
REPRESENTATIVE CONCEPTLaboratory slurry mixing under controlled pressure.
REPRESENTATIVE CONCEPTLaboratory rotor-stator dispersion.
REPRESENTATIVE CONCEPTLaboratory blade coating of electrode coupons.