LI-ION BATTERY EQUIPMENT & AUTOMATIONVADODARA, INDIA · INTERNATIONAL ENQUIRIES
AI-generated representative concept. Not a photograph of a completed Amplemech Battery Equipment & Automation machine. Pouch edge trimming and folding equipment family.
AI-generated representative concept. Not a photograph of a completed Amplemech Battery Equipment & Automation machine.
Li-ion Laboratory EquipmentAMB-PEF-01Planned

Edge Folding / Trimming Machine for Pouch Cells

Intended for finishing excess pouch laminate around a selected cell after an agreed sealing stage, while protecting the seal and electrical tabs.

This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation.

Technical Specifications

Edge Folding / Trimming Machine for Pouch Cells — indicative configuration
Technical ParameterIndicative Configuration
Equipment typePouch Cell Edge Folding & Trimming Machine
OperationSemi-automatic, manually loaded
Cell width classesUp to 100 / 200 / 300 mm
Cell lengthApprox. 20–300 mm, selected tooling
Cell thicknessApprox. 1–10 mm, fixture-dependent
Trimming lengthUp to 100 / 200 / 320 mm, model-dependent
Cutting mechanismPrecision shear / guided blade
Blade materialHardened tool steel
Edge allowanceMechanically adjustable
Folding methodGuided mechanical / pneumatic folding
Folding angleAdjustable to suit pouch-edge requirement
Folding sequenceSingle- or multistep
Edge heatingOptional controlled heating
Heating temperatureProposed up to 250°C class, optional heated tooling; subject to laminate and safety validation
Temperature controlDigital PID
Pneumatic supplyProposed 0.5–0.7 MPa
ActuationPneumatic cylinders
PositioningAdjustable mechanical locating fixtures
Tool changeoverReplaceable tooling
Control systemHardwired / PLC-HMI, configuration-dependent
Operator interfaceFoot switch with appropriate safeguarding
Cutting accuracyApplication-specific, to be validated
Cycle timeDependent on cell geometry and operations
Machine structureFabricated/machined steel frame
Electrical supply230 V / 415 V, model-dependent
SafetyCutting-zone guards, interlocks, protected actuation, emergency stop
ApplicationPouch-cell edge finishing following sealing

Specifications indicate preliminary equipment configurations. Final technical parameters, performance, material compatibility and supply arrangements will be confirmed following application review and detailed engineering.

Proposed model configurations

ModelConfiguration
AMB-PET-100Up to 100 mm
AMB-PET-200Up to 200 mm
AMB-PET-300Up to 300 mm

The proposed width, length, thickness and trimming ranges depend on the selected model, fixture and tooling; they are not universally simultaneous capacities. Pneumatic/mechanical mechanisms suit straightforward trimming and folding. Heated folding is optional; servo positioning is not standard and would require a separate customer-specific requirement. Cutting tolerance, folding quality and capacity require application trials.

Intended operating principle

Custom-configurable pouch-cell edge trimming and folding solutions use precision tooling, adjustable fixtures and optional thermal finishing. The proposed manually loaded, semi-automatic arrangement uses guided cutting and mechanical or pneumatic folding sequences to finish pouch edges after sealing. Replaceable tooling is selected for cell geometry and the required edge allowance.

Principal applications

Pouch-cell prototype finishing, edge-forming trials and development of repeatable handling around sealed cells. Confirm the intended process, materials and acceptance method during application review.

Configuration & integration

Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.

  • AMB-PET-100 — Up to 100 mm
  • AMB-PET-200 — Up to 200 mm
  • AMB-PET-300 — Up to 300 mm

Hardwired or PLC/HMI control depends on the sequence and safeguards. The standard concept uses pneumatic/mechanical mechanisms; servo motors are not automatically included. Optional heating uses digital PID control.

Utilities & installation

Configuration, component selection and supply feasibility follow the customer application review. Mechanical assemblies, specialist subsystems and integration are confirmed for the agreed scope. Utilities and facility interfaces depend on the selected configuration. This enquiry-led listing does not establish stock, completed manufacture or testing, immediate dispatch, or a confirmed supplier partnership.

Engineering & safety considerations

Cutting-zone guarding, interlocks, protected actuation and emergency isolation require assessment. A foot switch alone is not adequate safeguarding. Optional heated tooling requires temperature limits, hot-surface protection and thermal review for the laminate. Cell geometry, cutting tolerance, folding quality, material compatibility and operating capacity require application trials.

A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.

Read the Product Information Disclaimer

Typical engineering workflow

  1. Define the input materials, geometry and process objective.
  2. Agree the configuration, interfaces and safety requirements.
  3. Establish a trial plan and measurable acceptance criteria.
  4. Confirm technical scope before a quotation or delivery commitment.

Technical documentation

Request technical documentation and an application-specific configuration with your enquiry.

Questions about this equipment

Is this equipment available for immediate delivery?

This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation. Please request the current engineering and supply status.

Can the configuration be adapted to our application?

Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.

Continue exploring

Related equipment