REPRESENTATIVE CONCEPTLaboratory Vacuum Planetary Mixer
Li-ion Laboratory EquipmentLaboratory slurry mixing under controlled pressure.

Intended to define a coordinated set of manual research tools for aligning pouch-cell electrodes and closing selected pouch material; the included tools must be agreed individually.
| Parameter | Indicative Configuration |
|---|---|
| Equipment type | Manual Pouch Cell Stacking & Sealing Kit |
| Operating principle | Manual electrode stacking and separate heat sealing |
| Fixture size classes | Up to 100 / 150 / 200 mm |
| Electrode arrangement | Anode / separator / cathode stacking |
| Alignment arrangement | Adjustable locating fixtures |
| Electrode support | Removable positioning tray |
| Stack height | Subject to fixture and cell-design requirements |
| Separator handling | Manual sheet placement; roll-feed fixture optional |
| Electrode positioning | Manual precision locators |
| Stacking accuracy | Subject to fixture design and operator procedure |
| Tab positioning | Adjustable tab-location fixture |
| Cell pouch handling | Manual pouch positioning and insertion |
| Sealing method | Heated-bar sealing module |
| Sealing length | Up to 100 / 150 / 200 mm, configuration-dependent |
| Sealing width | Preliminary 3–6 mm, selected tooling |
| Sealing temperature | Target 50–250°C, sealing-module-dependent |
| Sealing dwell time | Adjustable 0–99 seconds |
| Sealing pressure | Adjustable; actual force dependent on actuator and tooling |
| Actuation | Manual / pneumatic, sealing configuration-dependent |
| Heating control | Digital PID |
| Tool material | Machined metal fixtures with suitable insulating elements |
| Electrical supply | 230 V AC for powered sealing module |
| Pneumatic supply | 5–7 bar, if pneumatic actuation selected |
| Optional accessories | Vacuum sealing, pouch-forming fixture, tab holders |
| Safety | Guarded heated jaws, thermal cutoff and actuation safeguards |
| Application | Laboratory pouch-cell electrode assembly and edge sealing |
Specifications indicate preliminary equipment configurations. Final technical parameters, performance, material compatibility and supply arrangements will be confirmed following application review and detailed engineering.
This is a configurable kit of manual stacking fixtures and a separate sealing module, not a fully automatic assembly line. Electrolyte filling, vacuum degassing and cell formation are not automatically included. Vacuum sealing and pouch-forming fixtures are optional; hermetic sealing is not guaranteed.
A configurable kit combines manual anode/separator/cathode stacking fixtures with a separate heated-bar sealing module. Adjustable locators, positioning trays and tab fixtures support laboratory pouch-cell assembly. Manual or optional pneumatic sealing actuation is selected for the agreed scope; stacking and sealing are separate operations.
Research pouch-cell prototyping, stack-handling trials and development of a defined manual assembly sequence. Confirm the intended process, materials and acceptance method during application review.
Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.
Manual stacking fixtures are separate from the powered PID-controlled sealing module; pneumatic actuation and vacuum sealing are optional.
Final configuration and supply arrangements follow application review and detailed engineering. Utilities, facility interfaces and integration are agreed for the selected equipment. This enquiry-led listing does not establish current manufacture, completed installations, stock, immediate dispatch or a confirmed partner relationship.
Actual stacking size, alignment and seal integrity depend on electrode geometry, fixture design, operator procedure, pouch laminate, temperature, pressure and dwell time. Heated jaws need guarding, independent thermal cutoff and appropriate actuation safeguards. Pneumatic and optional vacuum configurations require separate assessment; no hermetic-seal performance is established.
A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.
Read the Product Information Disclaimer
Request technical documentation and an application-specific configuration with your enquiry.
This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation. Please request the current engineering and supply status.
Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.
REPRESENTATIVE CONCEPTLaboratory slurry mixing under controlled pressure.
REPRESENTATIVE CONCEPTLaboratory rotor-stator dispersion.
REPRESENTATIVE CONCEPTLaboratory blade coating of electrode coupons.