REPRESENTATIVE CONCEPTLaboratory Vacuum Planetary Mixer
Li-ion Laboratory EquipmentLaboratory slurry mixing under controlled pressure.

Intended for laboratory comminution or blending trials in closed milling jars, where milling-media contamination and heat generation may affect material properties.
| Parameter | Indicative Configuration |
|---|---|
| Equipment type | Laboratory Planetary Ball Mill |
| Grinding stations | 1 / 2 / 4, model-dependent |
| Grinding jar volumes | 12 / 25 / 50 / 80 / 125 / 250 / 500 mL |
| Nominal jar capacity | Not equivalent to usable sample volume |
| Speed range | Preliminary 100–650 RPM family target |
| Planetary principle | Combined revolution and counter-rotation |
| Rotation ratio | Selected design, e.g. 1:−2 |
| Grinding mode | Dry and wet, subject to material suitability |
| Jar materials | Stainless steel / zirconia / alumina / agate, selected type |
| Grinding media | Compatible balls selected for process |
| Grinding media diameter | Approx. Ø3–30 mm, application-dependent |
| Drive | Geared/electronic variable-speed arrangement |
| Drive motor | Preliminary 0.75–2.2 kW family envelope |
| Operating time | Programmable timer |
| Direction reversal | Optional automatic reversing cycles |
| Balance arrangement | Engineered balancing and counterweight configuration |
| Jar retention | Positive mechanical clamping and containment |
| Cover construction | Enclosed, interlocked safety cover |
| Control interface | Digital controller; advanced recipes optional |
| Power supply | 230 V / 415 V, model-dependent |
| Safety | Cover interlock, imbalance assessment, overspeed protection |
| Applications | Material mixing, grinding and powder preparation |
Specifications indicate preliminary equipment configurations. Final technical parameters, performance, material compatibility and supply arrangements will be confirmed following application review and detailed engineering.
Jar capacity is not usable sample volume. Speed, motor power, station count, jar size and load are configuration-dependent; family limits are not simultaneously attainable ratings. Final particle size depends on feed material, ball charge, time and processing conditions.
Laboratory planetary milling solutions offer configurable jar capacities, grinding media, process settings and safety arrangements. Combined revolution and counter-rotation provide impact and friction for material mixing, grinding and powder preparation. Milling results depend on material hardness, feed size, ball charge, time and processing conditions; no final particle size is promised.
Powder size-reduction studies, precursor blending and preparation of research material requiring controlled media contact. Confirm the intended process, materials and acceptance method during application review.
Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.
Digital control with a programmable timer; automatic reversing and advanced recipes are optional.
Final configuration and supply arrangements follow application review and detailed engineering. Utilities, facility interfaces and integration are agreed for the selected equipment. This enquiry-led listing does not establish current manufacture, completed installations, stock, immediate dispatch or a confirmed partner relationship.
Planetary drive loads, jar retention, balance, overspeed protection and interlocked containment require engineering verification. Jar integrity, pressure, heat generation, dust and liquid compatibility require process review. Wet milling does not establish solvent safety. Independent mechanism design is required; proprietary drive, balance or clamping mechanisms must not be reproduced.
A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.
Read the Product Information Disclaimer
Request technical documentation and an application-specific configuration with your enquiry.
This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation. Please request the current engineering and supply status.
Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.
REPRESENTATIVE CONCEPTLaboratory slurry mixing under controlled pressure.
REPRESENTATIVE CONCEPTLaboratory rotor-stator dispersion.
REPRESENTATIVE CONCEPTLaboratory blade coating of electrode coupons.