REPRESENTATIVE CONCEPTLaboratory Vacuum Planetary Mixer
Li-ion Laboratory EquipmentLaboratory slurry mixing under controlled pressure.

Intended for programmed charge/discharge studies on selected cells, with channel measurement, electrical limits and safety responses defined around the test protocol.
| Parameter | Indicative Configuration |
|---|---|
| Equipment type | Multi-Channel Battery Charge/Discharge Tester |
| Channel configurations | 8 / 16 / 32, configurable |
| Channel operation | Independently programmable |
| Voltage class | 0–5 V per channel |
| Current class | Up to 1 / 6 / 10 A, selected model |
| Low-current measurement | Dedicated mA/µA ranges, where supported |
| Voltage accuracy | Precision class selectable; subject to selected equipment confirmation |
| Current accuracy | Precision class selectable; subject to selected equipment confirmation |
| Measurement conversion | Resolution subject to selected equipment confirmation |
| Charging modes | CC / CV / CC-CV |
| Discharging modes | CC / CP; additional modes subject to selected system |
| Cycling programmes | Programmable multistep profiles |
| Logging interval | Configurable; minimum interval subject to selected equipment confirmation |
| Capacity recording | Ah / mAh |
| Energy recording | Wh / mWh |
| Internal resistance testing | Optional DCIR |
| Cell formats | Coin / cylindrical / pouch with fixtures |
| Temperature input | Optional auxiliary channels |
| Communication | Ethernet / USB, configuration-dependent |
| Data export | CSV or compatible test-data formats |
| Electrical supply | Supplier-dependent, Indian/international options |
| Safety | Programmable limits, channel protection and suitable emergency isolation |
Specifications indicate preliminary equipment configurations. Final technical parameters, performance, material compatibility and supply arrangements will be confirmed following application review and detailed engineering.
Channel count, current range and measurement options depend on the selected equipment. The current classes are alternatives and do not establish simultaneous performance across every channel. Precision, conversion resolution, logging and software capabilities require confirmation against the actual selected supplier and model; no supplier benchmark is a guaranteed Amplemech rating.
Configurable battery cycling and cell characterisation solutions combine selected precision instrumentation with application-specific fixtures and integration. Independently programmable channels support agreed charge/discharge profiles and data collection. Equipment configuration and specialised subsystems are selected according to application requirements, with engineering integration and supply feasibility confirmed during technical evaluation.
Cell characterisation, research cycling protocols and comparison of capacity or resistance trends under controlled conditions. Confirm the intended process, materials and acceptance method during application review.
Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.
Selected channel electronics, software and interfaces require confirmation; auxiliary temperature inputs and DCIR are optional.
Final configuration and supply arrangements follow application review and detailed engineering. Utilities, facility interfaces and integration are agreed for the selected equipment. This enquiry-led listing does not establish current manufacture, completed installations, stock, immediate dispatch or a confirmed partner relationship.
Cell voltage, current, temperature and termination limits, fixture contacts, channel isolation, calibration and emergency isolation require application review and selected-equipment evidence. Cell fault and thermal-runaway hazards require suitable laboratory safeguards. Accuracy, resolution, logging, software features and available current ranges are unverified until the actual supplier and model are selected.
A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.
Read the Product Information Disclaimer
Request technical documentation and an application-specific configuration with your enquiry.
This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation. Please request the current engineering and supply status.
Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.
REPRESENTATIVE CONCEPTLaboratory slurry mixing under controlled pressure.
REPRESENTATIVE CONCEPTLaboratory rotor-stator dispersion.
REPRESENTATIVE CONCEPTLaboratory blade coating of electrode coupons.