REPRESENTATIVE CONCEPTLaboratory Vacuum Planetary Mixer
Li-ion Laboratory EquipmentLaboratory slurry mixing under controlled pressure.

Intended for laboratory evaluation of metered slurry deposition through a slot die, including the relationship between feed, coating gap and substrate motion.
| Technical Parameter | Indicative Configuration |
|---|---|
| Equipment type | Benchtop laboratory slot-die coating system |
| Operating principle | Metered liquid feed through a slot die onto a moving substrate |
| Proposed width classes | 50 / 100 / 200 mm, preliminary configuration targets |
| Proposed coating travel | 200 / 300 / 500 mm, selected model targets |
| Substrate handling | Flat-sheet translation stage; web handling separately engineered |
| Substrate types | Selected copper/aluminium foils and supported films, subject to trials |
| Coating speed | Proposed 1–30 mm/s stage envelope; operating window process-dependent |
| Die construction | Split stainless-steel die; grade selected for slurry compatibility |
| Die coating width | Selected head and shim; usable width subject to coating trials |
| Shim arrangement | Replaceable, application-specific shim |
| Die-to-substrate gap | Micrometre-adjustable setting; gap is not finished-film thickness |
| Metering feed | Selected programmable syringe or suitable low-pulsation pump |
| Flow range | Pump-, syringe- and slurry-dependent; confirmed after selection |
| Feed control | Coordinated with selected width, stage speed and wet-loading objective |
| Slurry preparation | Filtration and degassing interfaces, application-dependent |
| Wetted pathways | Selected stainless steel and compatible tubing/seals |
| Substrate support | Flat support bed; vacuum chuck optional |
| Linear drive | Motorised linear guide and screw/belt arrangement, selected design |
| Stage control | Programmable start/stop, travel and speed |
| Heating | Optional controlled substrate bed |
| Heating target | Proposed ambient to 120°C for selected heated-bed configuration |
| Temperature control | PID with independent overtemperature protection, heated option |
| Cleaning | Accessible die halves and removable wetted components |
| Film assessment | External wet-loading/thickness checks; no uniformity rating established |
| Drying integration | Separate drying or optional application-specific drying interface |
| Electrical supply | 230 V AC single-phase proposed; final load configuration-dependent |
| Safety | Motion limits, guarding, emergency stop and process-specific vapour controls |
| Application | Battery electrode coatability studies and small-sample process development |
Technical specifications are indicative and configurable. Final equipment parameters, performance, compatibility and supply arrangements will be confirmed following application review and engineering evaluation.
| Model | Principal Capacity / Range | Configuration | Intended Application |
|---|---|---|---|
| AMB-LSD-50 | Proposed 50 mm width / 200 mm travel | Flat-sheet stage; optional heated support | Small-sample coatability screening |
| AMB-LSD-100 | Proposed 100 mm width / 300 mm travel | Motorised sheet stage with selected metering feed | Electrode formulation and coating trials |
| AMB-LSD-200 | Proposed 200 mm width / 500 mm travel | Wider sheet stage; custom feed/drying interfaces | Larger laboratory electrode coupons |
These are proposed development configurations, not validated machines or supplier model ratings. Width, travel and the 1–30 mm/s stage envelope require mechanical and process validation; not every slurry or width can operate across the full speed range. Die gap is not finished coating thickness. Optional heating and drying require material, solvent and safety review; no film-uniformity, flow accuracy or thickness guarantee is established.
Application-specific equipment solutions combine mechanical engineering, automation integration and specialised subsystems. A selected metering feed supplies slurry through a slot die while a motorised substrate support moves underneath. Proposed benchtop sheet configurations support laboratory coatability trials; pump, die, motion and optional heating are selected for the customer process. Stable coating depends on rheology, feed, wetting, substrate motion and die alignment.
Electrode-slurry coatability research, slot-die process development and sample-web preparation. Confirm the intended process, materials and acceptance method during application review.
Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.
Programmable stage motion and a selected metering controller form the proposed control arrangement. Vacuum support, heated bed, drying integration and advanced recipe control are optional.
Final equipment selection, utilities, site interfaces and supply feasibility are established during application review. This enquiry-led listing does not establish current stock, completed manufacture or testing, dispatch availability, or an appointed specialist supplier.
Die/pump/tubing/seal compatibility, slurry agglomerates, pressure relief, cleaning, motion guarding and extraction require review. Flammable-solvent use, heated coatings and hazardous atmospheres require a documented process and electrical risk assessment; no solvent-safe or explosion-protected operation is established. Final usable width, speed, loading and coating acceptance require representative trials.
A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.
Read the Product Information Disclaimer
Request technical documentation and an application-specific configuration with your enquiry.
This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation. Please request the current engineering and supply status.
Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.
REPRESENTATIVE CONCEPTLaboratory slurry mixing under controlled pressure.
REPRESENTATIVE CONCEPTLaboratory rotor-stator dispersion.
REPRESENTATIVE CONCEPTLaboratory blade coating of electrode coupons.