REPRESENTATIVE CONCEPTLaboratory Vacuum Planetary Mixer
Li-ion Laboratory EquipmentLaboratory slurry mixing under controlled pressure.

Intended for drying studies on coated electrode samples, comparing heat input and solvent removal while monitoring effects on coating quality.
| Parameter | Indicative Configuration |
|---|---|
| Equipment type | Laboratory Infrared / Hot Air Dryer |
| Useful width | 100 / 200 / 300 mm |
| Heating method | Infrared / forced hot air / combined |
| Operating temperature | Ambient +10 to 150°C, proposed |
| Temperature control | Digital PID |
| Heating arrangement | Zoned IR heaters or electric-air heaters |
| Drying chamber length | Approx. 500–1500 mm, configuration-dependent |
| Product handling | Tray / sheet / optional motorised conveyor |
| Conveyor speed | Preliminary 0.1–2 m/min, conveyor version |
| Conveyor drive | Geared motor with variable-speed control |
| Air circulation | Adjustable blower system |
| Airflow direction | Configurable impingement or recirculation |
| Temperature measurement | PT100 / thermocouple |
| Drying timer | Programmable |
| Thermal insulation | Industrial high-temperature insulation |
| Internal construction | Stainless steel, selected grade |
| Outer enclosure | Powder-coated fabricated steel |
| Electrical heating power | Preliminary 1–6 kW family envelope |
| Exhaust | Dedicated outlet; treatment subject to process |
| Control system | PID controller; PLC/HMI optional |
| Electrical supply | 230 V / 415 V, model-dependent |
| Safety | Overtemperature cutoff, heater interlock, electrical protection |
| Application | Laboratory drying of coated battery electrode sheets |
Specifications indicate preliminary equipment configurations. Final technical parameters, performance, material compatibility and supply arrangements will be confirmed following application review and detailed engineering.
Tray and sheet configurations do not include a conveyor unless selected. Conveyor speed and the heating-power family envelope depend on the agreed configuration. Drying time, residual moisture and temperature uniformity require application trials.
A configurable laboratory dryer uses infrared energy, forced hot air or a selected combination to dry coated battery electrode sheets. Tray, sheet and optional motorised-conveyor arrangements can be evaluated with zoned heaters, adjustable airflow and PID temperature control. Heating and vapour-removal requirements are defined for the actual coating process.
Laboratory coating development, drying-profile comparison and sample preparation before electrode compaction. Confirm the intended process, materials and acceptance method during application review.
Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.
PID control is proposed as standard; PLC/HMI and a motorised conveyor are optional.
Final configuration and supply arrangements follow application review and detailed engineering. Utilities, facility interfaces and integration are agreed for the selected equipment. This enquiry-led listing does not establish current manufacture, completed installations, stock, immediate dispatch or a confirmed partner relationship.
Heating load, solvent release, airflow, exhaust treatment and fire hazards require review for the customer coating and solvent system. Ordinary hot-air or infrared construction does not establish flammable-solvent suitability or explosion protection. Drying time, residual moisture and temperature uniformity require trials.
A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.
Read the Product Information Disclaimer
Request technical documentation and an application-specific configuration with your enquiry.
This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation. Please request the current engineering and supply status.
Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.
REPRESENTATIVE CONCEPTLaboratory slurry mixing under controlled pressure.
REPRESENTATIVE CONCEPTLaboratory rotor-stator dispersion.
REPRESENTATIVE CONCEPTLaboratory blade coating of electrode coupons.