REPRESENTATIVE CONCEPTLaboratory Vacuum Planetary Mixer
Li-ion Laboratory EquipmentLaboratory slurry mixing under controlled pressure.

Intended as a discussion scope for enclosed handling of moisture- or oxygen-sensitive battery materials, using a gas and purification arrangement selected for the process.
| Parameter | Indicative Configuration |
|---|---|
| Equipment type | Laboratory Inert Atmosphere Glove Box |
| Model variants | Basic / Purified / Dual Workstation |
| Working gas | Argon / Nitrogen, application-dependent |
| Workstation | Two-glove or four-glove |
| Single chamber dimensions | Approx. 1200 × 750 × 900 mm |
| Dual chamber dimensions | Approx. 1800–2400 × 750 × 900 mm |
| Chamber material | SS304; SS316L optional |
| Chamber wall thickness | Preliminary 3 mm, design-dependent |
| Viewing window | Sealed transparent engineered panel |
| Gloves | Butyl rubber or process-compatible alternative |
| Glove port diameter | Target 200–220 mm |
| Oxygen level | Target below 1 ppm, purified version only |
| Moisture level | Target below 1 ppm, purified version only |
| Gas circulation | Closed-loop, purified version |
| Circulation flow | Preliminary 20–90 m³/h, configuration-dependent |
| Gas purification | Regenerable O₂/H₂O purifier, purified version |
| Oxygen measurement | Digital O₂ analyser |
| Moisture measurement | Digital H₂O analyser |
| Pressure control | Target ±10 mbar, subject to operating limits |
| Pressure monitoring | Digital differential pressure sensor |
| Main transfer chamber | Approx. Ø350–400 × 500–600 mm |
| Small transfer chamber | Optional |
| Transfer operation | Vacuum / inert-gas purge |
| Vacuum pump | External suitable vacuum pump |
| Purifier regeneration | Supplier-engineered automatic regeneration option |
| Control system | PLC/HMI for purified version; simpler control for basic version |
| Pressure foot control | Optional |
| Power supply | 230 V / 415 V AC, configuration-dependent |
| Internal accessories | Electrical feedthroughs, weighing balance, crimper integration |
| Safety | Pressure safeguards, gas alarms, oxygen-deficiency and regeneration safety assessment |
| Application | Coin-cell assembly, battery R&D and atmosphere-sensitive material handling |
Specifications represent preliminary configurable design targets. Final parameters, material compatibility, performance and availability will be confirmed after application review and engineering validation.
The basic purge-only model has no below-1-ppm oxygen or moisture claim. Below-1-ppm values are unvalidated targets for a suitable purified configuration only. A dual workstation does not by itself establish purification performance. Monitoring, purification and integration options are selected for the agreed configuration.
A configurable inert-atmosphere workstation is intended for battery research, coin-cell assembly and moisture-sensitive laboratory processes. The proposed range offers customisable chamber dimensions, application-dependent argon or nitrogen configurations, transfer chambers and laboratory-equipment integration. The basic version uses inert-gas purging; the purified version adds a selected circulation and purification arrangement. Enclosure integrity, process load and operating practices affect atmosphere conditions; no achieved purification or leak-rate performance is established.
Coin-cell assembly, battery R&D, moisture-sensitive laboratory processes and atmosphere-sensitive material handling with customer-specific workspace and equipment-integration requirements. Confirm the intended process, materials and acceptance method during application review.
Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.
The basic version uses a simpler control arrangement; PLC/HMI is proposed for the purified version. Oxygen and moisture analysers, pressure controls, accessories and regeneration automation are selected to suit the configuration. Purifier capacity, regeneration arrangement, circulation rate and sensor specifications require engineering and supplier selection.
Final configuration follows review of the customer process, workspace, gas-purity requirements and equipment interfaces. Inert-gas supply, evacuation, venting, power, exhaust and optional regeneration services require application-specific design. This enquiry-led listing does not establish current manufacture, completed testing, stock or immediate dispatch.
Pressure limits, enclosure integrity, glove and seal compatibility, gas alarms and oxygen-deficiency controls require engineering assessment. Purification and leak-rate performance require configuration-specific validation. Solvent handling, hydrogen-based regeneration and ignition or explosion hazards require documented process and supplier safety assessment; no certified purification, solvent safety, hydrogen-regeneration safety or explosion protection is claimed.
A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.
Read the Product Information Disclaimer
Request technical documentation and an application-specific configuration with your enquiry.
Intended partner-supply route only. No named partner appointment, authorisation, available machine, scope or delivery is confirmed by this listing. Please request the current engineering and supply status.
Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.
REPRESENTATIVE CONCEPTLaboratory slurry mixing under controlled pressure.
REPRESENTATIVE CONCEPTLaboratory rotor-stator dispersion.
REPRESENTATIVE CONCEPTLaboratory blade coating of electrode coupons.