REPRESENTATIVE CONCEPTLaboratory Vacuum Planetary Mixer
Li-ion Laboratory EquipmentLaboratory slurry mixing under controlled pressure.

Intended for small-volume dosing of compatible battery electrolyte into research cells, where material compatibility, moisture control and dose verification are essential.
| Technical Parameter | Indicative Configuration |
|---|---|
| Equipment type | Laboratory Electrolyte Filling Machine |
| Standard variants | Manual / Vacuum-assisted / XYZ |
| Cell compatibility | Coin / pouch / cylindrical, selected fixtures |
| Filling volume | Preliminary family envelope 0.1–200 mL |
| Micro-dosing configuration | Below 1 mL, selected precision pump |
| Dosing accuracy | Pump-, liquid- and calibration-dependent; to be established by dosing trials |
| Dispensing principle | Precision syringe / plunger metering pump |
| Pump drive | Stepper / servo-driven metering |
| Nozzle arrangement | Single nozzle; multiple optional |
| Nozzle material | SS316L / chemically compatible alternative |
| Wetted seals | PTFE / FKM / other verified compatible material |
| Dispensing rate | Programmable, pump-dependent |
| Dispensing volume | Digitally adjustable |
| Positioning | Manual fixture / programmable XYZ |
| XYZ motion | LM-guide / precision screw / suitable drive |
| Filling stations | 1 / 2 / 4, configuration-dependent |
| Vacuum assistance | Optional sealed filling chamber |
| Vacuum level | Target down to 10–100 mbar absolute, selected configuration |
| Inert-gas integration | Argon / nitrogen interface, optional |
| Reservoir | Sealed chemically compatible container |
| Liquid-level monitoring | Optional low-level sensor |
| Drip prevention | Suck-back / shutoff, selected pump |
| Weight verification | Optional digital weighing system |
| Control system | Digital controller / PLC-HMI |
| Recipe management | Programmable fill volume and sequence |
| Data recording | Optional batch record |
| Electrical supply | 230 V AC / selected configuration |
| Pneumatic supply | 5–7 bar if pneumatic actuators are used |
| Safety | Spill containment, chemically compatible construction, ventilation and ignition-risk controls |
| Applications | Laboratory electrolyte injection and controlled wetting |
Specifications indicate preliminary equipment configurations. Final technical parameters, performance, material compatibility and supply arrangements will be confirmed following application review and detailed engineering.
The 0.1–200 mL range is a preliminary family envelope, not the range of every model. A small-volume coin-cell dispenser is distinct from a larger vacuum-assisted filling configuration. Pump selection, fluid properties, bubbles, tubing, seals and calibration determine achievable dose and accuracy. Vacuum targets are absolute pressure and apply only to a selected vacuum-assisted configuration.
AMPLEMECH offers configurable laboratory electrolyte filling solutions with precision dispensing, application-specific cell fixtures and optional vacuum-assisted processing. Filling arrangements are established according to cell format, dosing volume and process requirements. A selected syringe or plunger metering pump supports the agreed dose, with manual fixtures or optional programmable XYZ positioning. Precision-fluid components, wetted pathways and integration are selected for the application.
Coin/pouch research-cell filling, electrolyte dose-comparison studies and controlled laboratory liquid addition. Confirm the intended process, materials and acceptance method during application review.
Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.
Digital control or PLC/HMI is selected for the agreed pump, sequence and motion requirements. Multi-nozzle arrangements, vacuum assistance, inert-gas interfaces, weighing verification, low-level sensing and batch records are optional.
Configuration, component selection and supply feasibility follow the customer application review. Mechanical assemblies, specialist subsystems and integration are confirmed for the agreed scope. Utilities and facility interfaces depend on the selected configuration. This enquiry-led listing does not establish stock, completed manufacture or testing, immediate dispatch, or a confirmed supplier partnership.
Dose validation requires the actual electrolyte, pump, liquid temperature, viscosity, bubbles, fluid pathways, seals and calibration. Wetted materials require documented compatibility review. Flammable-electrolyte suitability requires electrical, ventilation, electrostatic and ignition-risk assessment, with spill containment and suitable operating procedures. No universal dosing accuracy or solvent-safe operation is established.
A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.
Read the Product Information Disclaimer
Request technical documentation and an application-specific configuration with your enquiry.
This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation. Please request the current engineering and supply status.
Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.
REPRESENTATIVE CONCEPTLaboratory slurry mixing under controlled pressure.
REPRESENTATIVE CONCEPTLaboratory rotor-stator dispersion.
REPRESENTATIVE CONCEPTLaboratory blade coating of electrode coupons.