LI-ION BATTERY EQUIPMENT & AUTOMATIONVADODARA, INDIA · INTERNATIONAL ENQUIRIES
AI-generated representative concept. Not a photograph of a completed Amplemech Battery Equipment & Automation machine. Coin-cell electrode disc punching equipment family.
AI-generated representative concept. Not a photograph of a completed Amplemech Battery Equipment & Automation machine.
Li-ion Laboratory EquipmentAMB-EDC-20Under Development

Coin Cell Electrode Disc Cutter / Punch

Intended to cut circular electrode specimens from coated foil for coin-cell assembly, with edge quality and particulate generation treated as key process checks.

This equipment is under development. Design details, tested performance and delivery commitments require confirmation.

Technical Specifications

Coin Cell Electrode Disc Cutter / Punch — indicative configuration
ParameterIndicative Configuration
Machine typePrecision Coin Cell Electrode Disc Cutter
ModelsAMB-LDC-M / P / C
ActuationManual lever; pneumatic optional
Standard cutting diametersØ12 / 14 / 15 / 16 / 18 / 19 / 20 mm
Custom cutting sizesØ6–24 mm
Compatible materialsCopper foil, aluminium foil, coated electrodes and selected separator films
Material thicknessTarget 0.005–0.3 mm; up to 0.5 mm subject to application trials
Punch strokeTarget 20–25 mm
Punch/die materialHardened alloy tool steel
Tool hardnessTarget 58–62 HRC
Punch/die clearanceSelected to suit material and thickness
Punch guidancePrecision guide bushes and aligned die holders
Die changeoverInterchangeable matched tooling
Manual mechanismMechanical lever with guided ram
Pneumatic supplyProposed 5–6 bar, pneumatic version
Return mechanismSpring or pneumatic return
Sample collectionRemovable collection tray with appropriate ejection arrangement
Main structureMachined steel/aluminium construction
Surface protectionCorrosion-resistant finish
MountingBenchtop
Glove-box useOptional compact version, subject to dimensional compatibility
Electrical supplyNot required for manual version
SafetyCutting-zone guarding; suitable interlocked/two-hand control for powered version
ApplicationsCircular anode, cathode and separator sample preparation

Specifications represent preliminary configurable design targets. Final parameters, material compatibility, performance and availability will be confirmed after application review and engineering validation.

Proposed model configurations

ModelConfiguration
AMB-LDC-MManual precision disc cutter
AMB-LDC-PPneumatic precision disc cutter
AMB-LDC-CCustomised disc cutter

The manual model is the standard configuration. Pneumatic actuation is a separate optional configuration requiring guarding, control-circuit safety review and validation. Cutting diameter and thickness combinations, edge quality, dimensional accuracy, tool life and cutting force require material-specific engineering validation.

Intended operating principle

This compact laboratory disc cutter is intended to prepare circular electrode and selected separator samples for battery cell research. The standard manual configuration uses a mechanical lever, guided punch assembly and replaceable hardened punch-and-die sets, without electrical power. Interchangeable precision dies and guided alignment support the proposed configurable cutting diameters; actual edge quality and dimensions require trials with the selected material.

Principal applications

Circular anode, cathode and separator sample preparation for coin-cell research, comparative material testing and laboratory sample production. Confirm the intended process, materials and acceptance method during application review.

Configuration & integration

Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.

  • Standard manual mechanical lever and guided punch assembly
  • Interchangeable matched hardened dies
  • Optional pneumatic actuation as a separate configuration
  • Customisable cutting diameters
  • Optional compact glove-box version, subject to fit

The standard manual version uses mechanical lever actuation and a guided ram, without motorised controls. The optional pneumatic configuration requires a separately validated guarded operating sequence and suitable interlocked or two-hand controls.

Utilities & installation

The standard manual version requires no electrical supply. The optional pneumatic version has a proposed air supply of 5–6 bar; its pneumatic circuit, isolation, guarding and control-safety requirements must be assessed for the selected configuration.

Engineering & safety considerations

Punch/die clearance, tool hardness, guidance and the proposed material-thickness envelope require engineering validation using representative foils, coatings and separator films. No burr-free cutting, dimensional accuracy, tool life or cutting-force rating is guaranteed. Powered actuation requires cutting-zone guarding and control-circuit safety validation. Glove-box fit and ejection arrangements require configuration checks; no proprietary tooling or patented mechanism is represented as an Amplemech design.

A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.

Read the Product Information Disclaimer

Typical engineering workflow

  1. Define the input materials, geometry and process objective.
  2. Agree the configuration, interfaces and safety requirements.
  3. Establish a trial plan and measurable acceptance criteria.
  4. Confirm technical scope before a quotation or delivery commitment.

Technical documentation

Request technical documentation and an application-specific configuration with your enquiry.

Questions about this equipment

Is this equipment available for immediate delivery?

This equipment is under development. Design details, tested performance and delivery commitments require confirmation. Please request the current engineering and supply status.

Can the configuration be adapted to our application?

Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.

Continue exploring

Related equipment