REPRESENTATIVE CONCEPTLaboratory Vacuum Planetary Mixer
Li-ion Laboratory EquipmentLaboratory slurry mixing under controlled pressure.

Intended for frequency-response measurements on selected cells or electrochemical samples, where fixture effects and test conditions must be distinguished from the sample response.
| Parameter | Indicative Configuration |
|---|---|
| Equipment type | Electrochemical Impedance Spectroscopy System |
| Measurement channels | 1 / 2 / 4 / 8, subject to instrument selection |
| EIS frequency range | Frequency coverage subject to selected instrument confirmation |
| Extended frequency | Optional; subject to verified selected-instrument coverage |
| Operating modes | Potentiostatic / galvanostatic |
| Applied potential range | Instrument-dependent; selected voltage limits require confirmation |
| Maximum applied current | Instrument-dependent; selected current limits require confirmation |
| Low-current measurement | nA / µA ranges, selected instrumentation |
| AC excitation | Programmable voltage/current amplitude |
| Potential resolution | Instrument-dependent |
| Current resolution | Instrument-dependent |
| Impedance measurement | Complex impedance magnitude and phase |
| Measurement plots | Nyquist / Bode |
| Electrochemical techniques | EIS, CV and selected techniques |
| Frequency sweep | Programmable logarithmic / selected sweeps |
| Cell connection | 2 / 3 / 4 electrode arrangements, instrument-dependent |
| Cell compatibility | Coin / pouch / laboratory test cells |
| Measurement software | Dedicated EIS analysis software |
| Equivalent-circuit fitting | Available with selected software |
| Data export | CSV / TXT / compatible file formats |
| Communication | USB / Ethernet, configuration-dependent |
| Temperature integration | Optional external chamber or probe |
| Electrical supply | Supplier-approved AC input |
| Safety | Potential/current limits and manufacturer-defined protections |
| Application | Cell characterisation, impedance and electrochemical studies |
Technical configurations are indicative and subject to application requirements. Final equipment selection, specifications, performance and supply arrangements will be confirmed during technical evaluation and quotation.
The model labels describe proposed selection and integration classes, not Amplemech-manufactured instruments. Channel count, frequency coverage, potential/current limits, resolution, software and available techniques depend on the selected instrument and verified supplier documentation. No model-specific frequency, current or accuracy rating is established.
AMPLEMECH offers configurable electrochemical testing and impedance-analysis solutions for battery research. Instrument capabilities, measurement ranges, software and integration arrangements are selected according to application requirements. A selected instrument applies a small electrical perturbation and measures response across an agreed frequency sweep to support impedance magnitude, phase, Nyquist and Bode analysis. This listing does not establish in-house manufacture of potentiostat electronics, measurement hardware or analytical software.
Cell impedance research, comparison of electrochemical ageing trends and investigation of material or interface response. Confirm the intended process, materials and acceptance method during application review.
Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.
Dedicated instrument software provides the selected techniques and analysis functions; equivalent-circuit fitting, auxiliary temperature integration and interfaces depend on the agreed equipment and licences.
Equipment configuration and specialised subsystems are selected according to application requirements, with engineering integration and supply feasibility confirmed during technical evaluation. Utilities and facility interfaces depend on the selected equipment. This enquiry-led listing does not establish stock, immediate dispatch, completed installations, in-house manufacture of specialist instruments or a confirmed supplier relationship.
Instrument selection, shielding, cable arrangement, perturbation amplitude, operating-point stability and analysis assumptions require review for the test cell. Frequency coverage, potential/current limits, accuracy, software licences and integration interfaces require selected-supplier evidence. Equivalent-circuit fitting depends on the selected software and a justified model; data interpretation requires appropriate expertise.
A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.
Read the Product Information Disclaimer
Request technical documentation and an application-specific configuration with your enquiry.
Intended partner-supply route only. No named partner appointment, authorisation, available machine, scope or delivery is confirmed by this listing. Please request the current engineering and supply status.
Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.
REPRESENTATIVE CONCEPTLaboratory slurry mixing under controlled pressure.
REPRESENTATIVE CONCEPTLaboratory rotor-stator dispersion.
REPRESENTATIVE CONCEPTLaboratory blade coating of electrode coupons.