REPRESENTATIVE CONCEPTSemi-Automatic Z-Stacking Machine (Pouch)
Li-ion Pouch Cell EquipmentPouch electrode Z-fold stacking.

Intended for controlled electrolyte addition into a defined pouch opening, with dose, wetting and closure handover considered together.
| Technical Parameter | Indicative Configuration |
|---|---|
| Equipment type | Electrolyte Filling Machine (Pouch) |
| Intended application | Pouch-cell electrolyte metering |
| Process principle | A compatible metering path delivers electrolyte into the supported pouch under a qualified environmental condition. Dosing and later wetting are separate operations; neither process is established by a nominal fill volume. |
| Proposed configurations | Single-position / Multi-position / Vacuum-assisted |
| Process fluid | Actual electrolyte/acid formulation and temperature declared |
| Metering | Selected compatible syringe/plunger/volumetric or level method |
| Dose | Customer mass/volume per cell with calibration method |
| Fluid path | Pump, tubing, valve and seal compatibility verified for liquid |
| Reservoir | Compatible enclosed supply/level arrangement |
| Nozzles | Selected count and cell access geometry |
| Bubble control | Selected priming/venting and controlled fluid transfer |
| Verification | Optional weighing or process-specific level/dose check |
| Vacuum option | Only for selected compatible filling configuration; absolute pressure basis |
| Spill handling | Containment, controlled drainage and safe maintenance |
| Sizing and capacity basis | Application-specific; finalised after technical review. Relevant units: mL/cell or g/cell; cells/h conditional; mbar absolute; ppm if verified. No rating is inferred from the machine ID. |
| Control architecture | Selected process/instrument controls; integration PLC/HMI only where justified by the agreed scope. |
| Utilities and installation | Power, air/hydraulics, thermal services and exhaust only as applicable to the selected scope; site requirements confirmed in the technical offer. |
| Service and configuration changes | Accessible service interfaces and controlled tooling/recipe changes for the agreed process; cleaning/contamination requirements application-specific. |
| Safety and process limits | Flammability, static, leaks, vapour exhaust and no universal dose accuracy. Safeguards and required conformity route need competent application-specific assessment. |
| Acceptance basis | Agreed drawings/material samples and measurable process acceptance for dose; cell fixture; fluid compatibility; calibration; vacuum assist; moisture. Actual trials and selected-component evidence required before a performance commitment. |
Technical specifications are indicative and configurable. Final equipment parameters, performance, compatibility and supply arrangements will be confirmed following application review and detailed engineering.
Configurations are alternatives or separately selected options, not universal inclusions. Final scope depends on the actual process, materials and selected components; no capacity, precision, yield, delivery or certification is established by this listing.
Application-specific machinery combining mechanical engineering, automation integration and selected specialist subsystems. A compatible metering path delivers electrolyte into the supported pouch under a qualified environmental condition. Dosing and later wetting are separate operations; neither process is established by a nominal fill volume. The exact selected configuration and supply feasibility are established after enquiry qualification; this is not an assertion of completed manufacture or available stock.
Pilot pouch-cell filling trials and dose repeatability studies before wetting and final sealing. Confirm the intended process, materials and acceptance method during application review.
Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.
Standard and optional operations are separated in the technical offer. Specialist technology, instrumentation and safety functions require selected-equipment evidence and appropriate integration validation.
Installation scope and facility responsibilities are agreed for the actual process. No unselected utility plant, environmental-control system, process recipe or complete turnkey facility is automatically included.
Flammability, static, leaks, vapour exhaust and no universal dose accuracy. Configurations are alternatives or separately selected options, not universal inclusions. Final scope depends on the actual process, materials and selected components; no capacity, precision, yield, delivery or certification is established by this listing. No verified performance, supplier appointment or certification is established by this catalogue entry.
A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.
Read the Product Information Disclaimer
Request technical documentation and an application-specific configuration with your enquiry.
This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation. Please request the current engineering and supply status.
Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.
REPRESENTATIVE CONCEPTPouch electrode Z-fold stacking.
REPRESENTATIVE CONCEPTPouch laminate heat sealing.
REPRESENTATIVE CONCEPTPouch laminate pocket forming.