REPRESENTATIVE CONCEPTVacuum Planetary Mixer (10–50 L Pilot)
Li-ion Electrode ManufacturingPilot-batch vacuum slurry mixing.

Intended for pilot-web electrode trials using metered slot-die deposition, with stable slurry feed and continuous foil handling qualified together.
| Technical Parameter | Indicative Configuration |
|---|---|
| Equipment type | Pilot Slot-Die Coating Machine |
| Intended application | Pilot-web slot-die coating |
| Process principle | A selected slot die deposits a metered slurry film on a moving foil web. Feed, die alignment and coating bead behaviour must remain suitable as web conditions change; the drying stage needs its own process qualification. |
| Proposed configurations | Single-side slot die / Intermittent / Custom web path |
| Die | Selected specialist die/manifold for actual slurry |
| Width | Usable coating width, not mechanical die width alone |
| Shim | Replaceable slot/shim selected for particle/rheology basis |
| Gap | Adjustable die alignment; setting is not finished-film thickness |
| Pump | Selected low-pulsation compatible metering feed |
| Conditioning | Optional filtration/degassing with cleanability assessment |
| Web | Controlled foil transport, tension and edge guidance |
| Coating window | Feed, speed and bead stability established by trials |
| Drying | Separate validated drying/solvent-removal interface |
| Inspection | Transverse/longitudinal loading and defect acceptance |
| Sizing and capacity basis | Application-specific; finalised after technical review. Relevant units: mm; µm setting; mL/min; N; m/min; g/m². No rating is inferred from the machine ID. |
| Control architecture | Selected process/instrument controls; integration PLC/HMI only where justified by the agreed scope. |
| Utilities and installation | Power, air/hydraulics, thermal services and exhaust only as applicable to the selected scope; site requirements confirmed in the technical offer. |
| Service and configuration changes | Accessible service interfaces and controlled tooling/recipe changes for the agreed process; cleaning/contamination requirements application-specific. |
| Safety and process limits | Die pressure/cleaning, solvents, foil handling and no gap-to-thickness guarantee. Safeguards and required conformity route need competent application-specific assessment. |
| Acceptance basis | Agreed drawings/material samples and measurable process acceptance for usable width; die gap; feed rate; web tension; speed; coating profile. Actual trials and selected-component evidence required before a performance commitment. |
Technical specifications are indicative and configurable. Final equipment parameters, performance, compatibility and supply arrangements will be confirmed following application review and detailed engineering.
Configurations are alternatives or separately selected options, not universal inclusions. Final scope depends on the actual process, materials and selected components; no capacity, precision, yield, delivery or certification is established by this listing.
Application-specific machinery combining mechanical engineering, automation integration and selected specialist subsystems. A selected slot die deposits a metered slurry film on a moving foil web. Feed, die alignment and coating bead behaviour must remain suitable as web conditions change; the drying stage needs its own process qualification. The exact selected configuration and supply feasibility are established after enquiry qualification; this is not an assertion of completed manufacture or available stock.
Pilot slot-die process development, slurry-transfer studies and preparation of trial electrode rolls. Confirm the intended process, materials and acceptance method during application review.
Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.
Standard and optional operations are separated in the technical offer. Specialist technology, instrumentation and safety functions require selected-equipment evidence and appropriate integration validation.
Installation scope and facility responsibilities are agreed for the actual process. No unselected utility plant, environmental-control system, process recipe or complete turnkey facility is automatically included.
Die pressure/cleaning, solvents, foil handling and no gap-to-thickness guarantee. Configurations are alternatives or separately selected options, not universal inclusions. Final scope depends on the actual process, materials and selected components; no capacity, precision, yield, delivery or certification is established by this listing. No verified performance, supplier appointment or certification is established by this catalogue entry.
A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.
Read the Product Information Disclaimer
Request technical documentation and an application-specific configuration with your enquiry.
This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation. Please request the current engineering and supply status.
Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.
REPRESENTATIVE CONCEPTPilot-batch vacuum slurry mixing.
REPRESENTATIVE CONCEPTLarger-batch electrode slurry process review.
REPRESENTATIVE CONCEPTPilot roll-to-roll electrode coating.