REPRESENTATIVE CONCEPTVacuum Planetary Mixer (10–50 L Pilot)
Li-ion Electrode ManufacturingPilot-batch vacuum slurry mixing.

Intended for pilot densification of coated electrode webs, including review of roll heating where the material process requires it.
| Technical Parameter | Indicative Configuration |
|---|---|
| Equipment type | Pilot Roll Press / Calender (Heated) |
| Intended application | Pilot roll calendering of electrode webs |
| Process principle | An electrode web passes through a qualified rolling nip while tension and alignment protect the coating and foil. Heating may change material response, but thermal settings, roll stability and density outcomes require trials. |
| Proposed configurations | Cold / Heated / Roll-to-roll option |
| Roll geometry | Application-specific diameter and useful width |
| Roll surface | Selected hardened/ground rolls; finish verified by inspection |
| Nip adjustment | Independent controlled side settings |
| Pressing load | Customer electrode load basis with roll-deflection assessment |
| Drive | Selected geared drive and variable speed |
| Web handling | Controlled feed/rewind optional by selected scope |
| Heating | Optional heated-roll circuit |
| Thermal control | Selected temperature sensing and overtemperature safeguards |
| Thickness check | External measurement standard; inline option separately selected |
| Acceptance | Loaded roll geometry and electrode outcome require actual material trials |
| Sizing and capacity basis | Application-specific; finalised after technical review. Relevant units: mm; kN or N/mm; m/min; °C; µm measured by stated method. No rating is inferred from the machine ID. |
| Control architecture | Selected process/instrument controls; integration PLC/HMI only where justified by the agreed scope. |
| Utilities and installation | Power, air/hydraulics, thermal services and exhaust only as applicable to the selected scope; site requirements confirmed in the technical offer. |
| Service and configuration changes | Accessible service interfaces and controlled tooling/recipe changes for the agreed process; cleaning/contamination requirements application-specific. |
| Safety and process limits | Nip guarding, stored force, hot rolls and no guaranteed final density/thickness. Safeguards and required conformity route need competent application-specific assessment. |
| Acceptance basis | Agreed drawings/material samples and measurable process acceptance for roll width/diameter; line load; gap; speed; temperature; thickness acceptance. Actual trials and selected-component evidence required before a performance commitment. |
Technical specifications are indicative and configurable. Final equipment parameters, performance, compatibility and supply arrangements will be confirmed following application review and detailed engineering.
Configurations are alternatives or separately selected options, not universal inclusions. Final scope depends on the actual process, materials and selected components; no capacity, precision, yield, delivery or certification is established by this listing.
Application-specific machinery combining mechanical engineering, automation integration and selected specialist subsystems. An electrode web passes through a qualified rolling nip while tension and alignment protect the coating and foil. Heating may change material response, but thermal settings, roll stability and density outcomes require trials. The exact selected configuration and supply feasibility are established after enquiry qualification; this is not an assertion of completed manufacture or available stock.
Pilot electrode densification, heated/ambient comparison trials and preparation of calendered sample rolls. Confirm the intended process, materials and acceptance method during application review.
Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.
Standard and optional operations are separated in the technical offer. Specialist technology, instrumentation and safety functions require selected-equipment evidence and appropriate integration validation.
Installation scope and facility responsibilities are agreed for the actual process. No unselected utility plant, environmental-control system, process recipe or complete turnkey facility is automatically included.
Nip guarding, stored force, hot rolls and no guaranteed final density/thickness. Configurations are alternatives or separately selected options, not universal inclusions. Final scope depends on the actual process, materials and selected components; no capacity, precision, yield, delivery or certification is established by this listing. No verified performance, supplier appointment or certification is established by this catalogue entry.
A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.
Read the Product Information Disclaimer
Request technical documentation and an application-specific configuration with your enquiry.
This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation. Please request the current engineering and supply status.
Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.
REPRESENTATIVE CONCEPTPilot-batch vacuum slurry mixing.
REPRESENTATIVE CONCEPTLarger-batch electrode slurry process review.
REPRESENTATIVE CONCEPTPilot roll-to-roll electrode coating.