REPRESENTATIVE CONCEPTBattery Coding / Marking Machine
Automation & Material HandlingBattery identification and coding.

Intended to review movement of electrode rolls between defined stations without damaging coated foil, roll edges or cores; any AGV interface is a separately agreed integration scope.
| Technical Parameter | Indicative Configuration |
|---|---|
| Roll outside diameter | Application-specific roll outside diameter (mm) |
| Roll width | Application-specific roll width (mm) |
| Core diameter | Core bore (mm) matched to support/mandrel |
| Roll mass | Roll mass (kg) confirmed before structural/lift selection |
| Handling orientation | Horizontal/vertical handling only as engineered for selected fixture |
| Lift height | Required lift height (mm), application-specific |
| Lift/travel stroke | Travel/stroke (mm) defined by station layout |
| Roll support method | Core-supported or suitable cradle arrangement |
| Core gripping/mandrel option | Optional matched core mandrel/grip with contact assessment |
| Roll retention | Positive retention and release sequence for selected design |
| Drive mechanism | Manual assist or selected motorised drive |
| Lift mechanism | Selected engineered lift mechanism; rated components verified for scope |
| Manual/powered operation | Fixed mechanism / powered trolley / separately sourced mobile interface |
| Transfer alignment | Station datum alignment confirmed by load trials |
| Docking interface | Application-specific mechanical docking interface |
| Position feedback | Optional selected position sensor/encoder |
| Limit switches/sensors | End limits and part/retention sensors as required |
| Machine handshake signals | Agreed machine clear/ready/retained/fault signals |
| Optional AGV/AMR interface | Optional interface to separately sourced AGV/AMR; navigation excluded unless scoped |
| Battery or AC supply | Selected battery or AC system; charging/power scope confirmed |
| Safety guarding | Protected lift/transfer zones and assessed operator access |
| Emergency stop | Accessible emergency stop for powered configuration |
| Overload protection | Load/overtravel protection selected and validated for mechanism |
| Cleanliness requirements | Clean contact surfaces and process-specific contamination controls |
| Roll-surface damage prevention | Support/contact materials and handling trials to limit roll damage |
Technical specifications are indicative and configurable. Final equipment parameters, performance and supply arrangements will be confirmed following application review and engineering evaluation.
Roll diameter, width, mass, core and station geometry govern the design. This listing does not establish Amplemech manufacture of AGV navigation or verified rated lifting equipment. AGV/AMR supply and lift ratings require separate selected-equipment evidence.
Application-specific solutions combine mechanical engineering and automation integration with selected specialist subsystems. The proposed solution families are Fixed roll loading/positioning mechanism; Powered roll-handling trolley; Interface to separately sourced AGV/AMR. Configuration, acceptance and supply feasibility are established for the enquiry; this listing does not establish completed models or current stock.
Pilot electrode-roll logistics, unwind/rewind changeover and engineering review of automated station handovers. Confirm the intended process, materials and acceptance method during application review.
Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.
Roll diameter, width, mass, core and station geometry govern the design. This listing does not establish Amplemech manufacture of AGV navigation or verified rated lifting equipment. AGV/AMR supply and lift ratings require separate selected-equipment evidence.
Power, communications and any compressed-air requirements depend on the selected components and agreed site interfaces. Utilities and installation responsibilities are confirmed during technical review; optional modules are not standard inclusions.
Roll damage; contamination. Roll diameter, width, mass, core and station geometry govern the design. This listing does not establish Amplemech manufacture of AGV navigation or verified rated lifting equipment. AGV/AMR supply and lift ratings require separate selected-equipment evidence. Application-specific risk assessment, safeguards and acceptance validation are required before operation.
A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.
Read the Product Information Disclaimer
Request technical documentation and an application-specific configuration with your enquiry.
This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation. Please request the current engineering and supply status.
Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.
REPRESENTATIVE CONCEPTBattery identification and coding.
REPRESENTATIVE CONCEPTBattery-process conveyor handling.
REPRESENTATIVE CONCEPTIndustrial robot handling and assembly integration.