LI-ION BATTERY EQUIPMENT & AUTOMATIONVADODARA, INDIA · INTERNATIONAL ENQUIRIES
AI-generated representative concept. Not a photograph of a completed Amplemech Battery Equipment & Automation machine. Battery enclosure air-leak testing equipment family.
AI-generated representative concept. Not a photograph of a completed Amplemech Battery Equipment & Automation machine.
Inspection & Quality ControlAMB-ALT-01Planned

Air Leakage Tester for Batteries

Intended for pressure-based integrity checks of compatible battery enclosures, using a defined fixture, test pressure and acceptance method.

This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation.

Technical Specifications

Air Leakage Tester for Batteries — indicative configuration
Technical ParameterIndicative Configuration
Equipment typeBattery/enclosure air leakage test station
Test object and dimensionsCustomer-approved test object envelope (mm) and electrical state
Applicable test volumePart plus fixture volume (L), measured/defined for method
Test mediumClean dry air or separately approved compatible gas; not helium detection
Test pressure rangeLimited by customer part rating and selected instrument
Gauge/absolute pressure referenceGauge/absolute basis stated in final recipe
Leak-test methodPressure decay or differential pressure as selected
Pressure instrumentationSelected calibrated pressure/leak instrument
Measurement rangeSelected instrument and application pressure/flow ranges
Measurement resolutionActual selected instrument resolution; not assumed sensitivity
Test sensitivity, selected instrumentSystem sensitivity requires instrument, fixture and reference-leak validation
Fill timeProgrammable; established for volume, supply and fixtures
Stabilisation timeValidated settling time for actual thermal/pressure behaviour
Test durationValidated measurement duration; no universal cycle
Leak-rate acceptance unitPa/s or calibrated flow unit such as sccm with reference conditions
Temperature effects/compensationControlled environment or validated compensation where required
Sealing connectionCompatible sealed connector interface
Clamping fixtureManual clamp standard; powered guarded clamp optional
Pressure regulationRegulated, isolated pressure supply matched to part limits
Pressure release/ventingControlled vent with verified safe pressure before release
Data loggingOptional test/result/recipe recording
Barcode/serial numberOptional part/serial association
PLC/HMI optionSimple instrument control; PLC/HMI for selected integration
Calibration/reference leakTraceable reference leaks and documented calibration/verification
Operator/pressure safetyOverpressure protection, safe venting and guarded fixture release

Technical specifications indicate configurable equipment solutions. Final capabilities, operating parameters, instrumentation, performance and supply arrangements will be confirmed following application review and detailed engineering.

Proposed model configurations

ModelConfiguration
AMB-ALT-01-SManual fixture pressure-decay tester
AMB-ALT-01-IDifferential-pressure leak-test station
AMB-ALT-01-CSemi-automatic indexed leak-test fixture

This is an air pressure-decay/differential-pressure scope, not helium leak detection. Sensitivity, timing and thresholds require actual instrument, part and fixture validation. No universal leak-proof result or enclosure IP rating is established.

Intended operating principle

Application-specific solutions combine mechanical engineering and automation integration with selected specialist subsystems. Proposed configurations include Manual fixture pressure-decay tester; Differential-pressure leak-test station; Semi-automatic indexed leak-test fixture. Only the explicitly selected configuration and operations form the agreed scope. This enquiry-led listing does not establish completed manufacture, installations, inventory or a confirmed supplier appointment.

Principal applications

Empty or appropriately prepared battery-case integrity checks and assembly-process leak screening. Confirm the intended process, materials and acceptance method during application review.

Configuration & integration

Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.

  • Manual fixture pressure-decay tester
  • Differential-pressure leak-test station
  • Semi-automatic indexed leak-test fixture

This is an air pressure-decay/differential-pressure scope, not helium leak detection. Sensitivity, timing and thresholds require actual instrument, part and fixture validation. No universal leak-proof result or enclosure IP rating is established.

Utilities & installation

Electrical, communication and any compressed-air/conditioning requirements follow the actual selected components and site interfaces. Basic manual fixtures do not automatically include PLCs, servo drives or HMI systems. Utilities, optional modules and integration responsibilities are confirmed in the technical scope.

Engineering & safety considerations

Temperature effects; seal design. This is an air pressure-decay/differential-pressure scope, not helium leak detection. Sensitivity, timing and thresholds require actual instrument, part and fixture validation. No universal leak-proof result or enclosure IP rating is established. Customer-approved acceptance, application-specific risk assessment and appropriate safeguards are required before operation or substitution.

A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.

Read the Product Information Disclaimer

Typical engineering workflow

  1. Define the input materials, geometry and process objective.
  2. Agree the configuration, interfaces and safety requirements.
  3. Establish a trial plan and measurable acceptance criteria.
  4. Confirm technical scope before a quotation or delivery commitment.

Technical documentation

Request technical documentation and an application-specific configuration with your enquiry.

Questions about this equipment

Is this equipment available for immediate delivery?

This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation. Please request the current engineering and supply status.

Can the configuration be adapted to our application?

Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.

Continue exploring

Related equipment