REPRESENTATIVE CONCEPTPlate Brushing / Cleaning Machine
Lead-Acid Plate ManufacturingLead-acid plate surface and lug cleaning.

Intended for review of applying paste to both sides of a selected lead-acid grid, with feed, paste balance and downstream handling developed as one process.
| Technical Parameter | Indicative Configuration |
|---|---|
| Equipment type | Double-Side Plate Pasting Machine |
| Intended application | Double-sided lead-acid plate pasting |
| Process principle | A qualified paste feed and application arrangement fills/coats both sides of supported grids. Paste rheology, grid support and side-to-side balance affect loading and plate condition, requiring representative process trials. |
| Proposed configurations | Double-side continuous / Assisted feed / Format tooling |
| Grid | Customer grid geometry and support needs |
| Paste | Declared formulation, temperature and rheology |
| Loading target | Customer mass per side/plate; verified by weighing |
| Applicator | Selected roller/belt or process-specific application tool |
| Feed | Manual or selected continuous grid handling |
| Grid support | Supported locating and damage protection |
| Finishing | Selected surface/thickness finishing interface |
| Paste supply | Compatible controlled paste feed |
| Cleanout | Accessible wetted/contact areas with contained lead waste |
| Inspection | Loading, surface and grid-damage acceptance using actual material |
| Sizing and capacity basis | Application-specific; finalised after technical review. Relevant units: mm; g/side; plates/min conditional; kg/h; s. No rating is inferred from the machine ID. |
| Control architecture | Selected process/instrument controls; integration PLC/HMI only where justified by the agreed scope. |
| Utilities and installation | Power, air/hydraulics, thermal services and exhaust only as applicable to the selected scope; site requirements confirmed in the technical offer. |
| Service and configuration changes | Accessible service interfaces and controlled tooling/recipe changes for the agreed process; cleaning/contamination requirements application-specific. |
| Safety and process limits | Lead exposure, cleanup, moving applicators and no inferred production speed from id. Safeguards and required conformity route need competent application-specific assessment. |
| Acceptance basis | Agreed drawings/material samples and measurable process acceptance for grid range; two-side loading; feed; paste supply; finish; rejects. Actual trials and selected-component evidence required before a performance commitment. |
Technical specifications are indicative and configurable. Final equipment parameters, performance, compatibility and supply arrangements will be confirmed following application review and detailed engineering.
Configurations are alternatives or separately selected options, not universal inclusions. Final scope depends on the actual process, materials and selected components; no capacity, precision, yield, delivery or certification is established by this listing.
Application-specific machinery combining mechanical engineering, automation integration and selected specialist subsystems. A qualified paste feed and application arrangement fills/coats both sides of supported grids. Paste rheology, grid support and side-to-side balance affect loading and plate condition, requiring representative process trials. The exact selected configuration and supply feasibility are established after enquiry qualification; this is not an assertion of completed manufacture or available stock.
Lead-acid plate production engineering and evaluation of double-sided paste distribution. Confirm the intended process, materials and acceptance method during application review.
Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.
Standard and optional operations are separated in the technical offer. Specialist technology, instrumentation and safety functions require selected-equipment evidence and appropriate integration validation.
Installation scope and facility responsibilities are agreed for the actual process. No unselected utility plant, environmental-control system, process recipe or complete turnkey facility is automatically included.
Lead exposure, cleanup, moving applicators and no inferred production speed from id. Configurations are alternatives or separately selected options, not universal inclusions. Final scope depends on the actual process, materials and selected components; no capacity, precision, yield, delivery or certification is established by this listing. Lead-bearing material, dust, fumes, contaminated liquids and waste require competent exposure, containment and disposal assessment. No verified performance, supplier appointment or certification is established by this catalogue entry.
A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.
Read the Product Information Disclaimer
Request technical documentation and an application-specific configuration with your enquiry.
This equipment is under development. Design details, tested performance and delivery commitments require confirmation. Please request the current engineering and supply status.
Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.
REPRESENTATIVE CONCEPTLead-acid plate surface and lug cleaning.
REPRESENTATIVE CONCEPTLead-bearing slurry filtration review.
REPRESENTATIVE CONCEPTLead-alloy battery grid casting.