REPRESENTATIVE CONCEPTInter-Cell Welding / Partition Welding Machine
Lead-Acid Battery AssemblyLead-acid inter-cell joining.

Intended for casting lead-alloy straps onto prepared plate lugs in a defined lead-acid group, with alloy, lug preparation and thermal conditions qualified together.
| Technical Parameter | Indicative Configuration |
|---|---|
| Equipment type | Cast-On-Strap (COS) Machine |
| Intended application | Lead-acid cast-on-strap joining |
| Process principle | Located plate lugs contact molten alloy held in an appropriate mould arrangement, forming straps as the alloy solidifies. Lug condition, fill and cooling influence connection integrity and require destructive qualification. |
| Proposed configurations | Manual-assisted cos / Semi-auto group handling / Custom mould |
| Plate group | Customer group/lug geometry and condition |
| Lug preparation | Defined cleaning/flux process where appropriate |
| Alloy | Selected strap alloy and verified metallurgy |
| Mould | Group-specific casting cavities and thermal design |
| Metal delivery | Guarded specialist molten-lead system |
| Location | Supported group and controlled insertion/approach |
| Cycle | Process-specific thermal sequence, not generic output |
| Cooling/release | Controlled withdrawal and mould release |
| Exposure | Local capture and lead residue/flux management |
| Joint testing | Strap geometry, resistance and mechanical joint acceptance |
| Sizing and capacity basis | Application-specific; finalised after technical review. Relevant units: groups/cycle; kg melt; °C; s; µΩ by agreed method. No rating is inferred from the machine ID. |
| Control architecture | Selected process/instrument controls; integration PLC/HMI only where justified by the agreed scope. |
| Utilities and installation | Power, air/hydraulics, thermal services and exhaust only as applicable to the selected scope; site requirements confirmed in the technical offer. |
| Service and configuration changes | Accessible service interfaces and controlled tooling/recipe changes for the agreed process; cleaning/contamination requirements application-specific. |
| Safety and process limits | Molten metal/water, lead fumes, trapped moisture and no casting-strength guarantee. Safeguards and required conformity route need competent application-specific assessment. |
| Acceptance basis | Agreed drawings/material samples and measurable process acceptance for group/lugs; alloy; cavities; mould temperature; dip/cast sequence; joint acceptance. Actual trials and selected-component evidence required before a performance commitment. |
Technical specifications are indicative and configurable. Final equipment parameters, performance, compatibility and supply arrangements will be confirmed following application review and detailed engineering.
Configurations are alternatives or separately selected options, not universal inclusions. Final scope depends on the actual process, materials and selected components; no capacity, precision, yield, delivery or certification is established by this listing.
Custom-engineered equipment solutions subject to process review, detailed engineering and technical feasibility. Located plate lugs contact molten alloy held in an appropriate mould arrangement, forming straps as the alloy solidifies. Lug condition, fill and cooling influence connection integrity and require destructive qualification. The exact selected configuration and supply feasibility are established after enquiry qualification; this is not an assertion of completed manufacture or available stock.
Lead-acid group interconnection and cast-on-strap tooling/process trials. Confirm the intended process, materials and acceptance method during application review.
Mechanical interfaces, operating mode and control requirements are defined during engineering review. Available configuration choices depend on the agreed equipment scope.
Standard and optional operations are separated in the technical offer. Specialist technology, instrumentation and safety functions require selected-equipment evidence and appropriate integration validation.
Installation scope and facility responsibilities are agreed for the actual process. No unselected utility plant, environmental-control system, process recipe or complete turnkey facility is automatically included.
Molten metal/water, lead fumes, trapped moisture and no casting-strength guarantee. Configurations are alternatives or separately selected options, not universal inclusions. Final scope depends on the actual process, materials and selected components; no capacity, precision, yield, delivery or certification is established by this listing. Lead-bearing material, dust, fumes, contaminated liquids and waste require competent exposure, containment and disposal assessment. No verified performance, supplier appointment or certification is established by this catalogue entry.
A documented risk assessment, guarding review, material compatibility check and application-specific operating procedure are required before use. No CE, UL, IEC, hazardous-area approval or other certification is established by this listing. Conformity documentation depends on the agreed scope and destination requirements.
Read the Product Information Disclaimer
Request technical documentation and an application-specific configuration with your enquiry.
This listing represents an intended equipment or engineering offering. Feasibility, configuration and availability require confirmation. Please request the current engineering and supply status.
Share your materials, required capacity, process constraints and acceptance criteria. The team will review feasibility before confirming any custom scope.
REPRESENTATIVE CONCEPTLead-acid inter-cell joining.
REPRESENTATIVE CONCEPTLead-acid plate wrapping and stack preparation.
REPRESENTATIVE CONCEPTLead-acid plate enveloping and group stacking.